Building Industries
27 courses · Sierra College · 2025-2026 Catalog
Classes: Fall 2025 · Spring 2026 · Summer 2026
BI 0001 OSHA Construction Safety Training
- Units
- 1
- Hours
- 18 lecture
- Formerly
- CET 1
Covers a variety of construction safety and health hazards workers may encounter. Provides safety information to construction workers about employee and employer rights and responsibilities. Emphasizes identification, avoidance, abatement, control, and prevention of job-related hazards on construction sites. This course is taught by authorized industry outreach trainers, and upon successful completion, students will receive the OSHA 10 Hour card. (not transferable)
BI 0002 OSHA 30-Hour Construction Safety Training
- Units
- 2
- Hours
- 36 lecture
Covers specific OSHA requirements as they apply to the construction industry and teaches safety awareness to help recognize and reduce the risks of job site hazards. This course is an orientation and covers safety and health hazards workers may face on construction work sites with emphasis on hazard identification, avoidance, control and prevention and is intended for supervisors or workers who have some safety responsibility. Upon successful completion, 30 hour OSHA card issued by instructor. (not transferable)
BI 0003 Introduction to Construction and CNC Woodworking
- Units
- 3
- Hours
- 108 (36 lecture, 72 laboratory)
- Advisory
- Completion with grade of "C" or better or concurrent enrollment in BI 1
- Formerly
- CET 3
Designed to teach the skills required to be successful in the construction and woodworking industries. Topics include fundamentals of woodworking, safe operation of hand tools, introduction to wood CNC manufacturing, project drawings, and environmentally sound design and construction techniques. Hands-on experience with construction and woodworking tools and materials based on assigned student project(s). (not transferable)
BI 0005 Introduction to the Built Environment
- Units
- 3
- Hours
- 54 lecture
- Formerly
- CET 5
BI 0006 Introduction to Construction Management
- Units
- 3
- Hours
- 54 lecture
- Prerequisite
- Completion of BI 5 with grade of "C" or better
- Transfers to
- CSU
Introduction to Construction Management. Topics are based on learning outcomes from the American Council for Construction Education (ACCE). This course introduces the structure of construction estimation, financing, and proper planning. (CSU)
BI 0007 Building with Green Construction Materials
- Units
- 4
- Hours
- 180 (18 lecture, 162 laboratory)
- Advisory
- Completion with grade of "C" or better or concurrent enrollment in BI 1
- Formerly
- CET 7
- Transfers to
- CSU
Project-based study of the performance characteristics of building materials using sustainable construction techniques and materials. Includes the basic properties and installation techniques of metals, aggregates, cement products, asphalt products and wood. Safe handling of construction materials and tools. (CSU)
BI 0008 Civil Applications of Computer-Aided Design
- Units
- 3
- Hours
- 90 (36 lecture; 54 laboratory which may be scheduled TBA)
- Prerequisite
- Completion of ADVM 2 or BI 10 with grade of "C" or better or equivalent as determined by instructor
- Formerly
- DES 10
- Transfers to
- CSU
Development of drafting skills used in the areas of industrial and civil engineering support. Emphasis on land division, determination of location and direction, development of plots based upon legal description and the fundamentals of utilizing surveying data as applied to preliminary and final maps. Designed for students who have attained an intermediate knowledge of the processes and practices of engineering design/drafting support. Introduction to AutoCAD Civil 3D software. (CSU)
BI 0010 Architectural Drawing I
- Units
- 3
- Hours
- 90 (36 lecture; 54 laboratory which may be scheduled TBA)
- Formerly
- DES 20
- Transfers to
- CSU
Introduction to the fundamentals of residential construction and design documentation. Drawings of a residence are developed and detailed, to include sketches, site plan and floor plans, foundation, elevations, and section views. AutoCAD instruction is incorporated to develop CAD drawings and electronic data sets. (CSU)
BI 0011 Architectural Drawing II
- Units
- 3
- Hours
- 90 (36 lecture; 54 laboratory which may be scheduled TBA)
- Prerequisite
- Completion of BI 10 with grade of "C" or better or equivalent as determined by instructor
- Formerly
- DES 21
- Transfers to
- CSU
Advances the skills and knowledge of residential architectural drawing production started in BI 10. Course focuses on production of residential architectural drawings of a 2-story wood framed house in the context of current and relevant building codes, construction materials and methods, industry standard work flow, production and graphic standards through the use of a drawing software application. Additional skills of software utilization, drawing management, complex drawing creation and printing will be covered. This course teaches intermediate AutoCAD skills. (CSU)
BI 0012 Architectural Drawing III-BIM (Building Information Modeling)
- Units
- 3
- Hours
- 90 (36 lecture; 54 laboratory which may be scheduled TBA)
- Prerequisite
- Completion of BI 11 with grade of "C" or better or equivalent as determined by instructor
- Formerly
- DES 22
- Transfers to
- CSU
Continuation of the architectural design started in BI 10 and 11. Students utilize Building Information Modeling (BIM) using REVIT software to develop commercial architectural documentation (including electronic data sets) in adherence to the International Building Code (IBC) and local county and state codes. (CSU)
BI 0015 Managing the Computer-Aided Design (CAD) Environment
- Units
- 3
- Hours
- 90 (36 lecture; 54 laboratory which may be scheduled TBA)
- Prerequisite
- Completion of BI 8, ADVM 11 or BI 12 with grade of "C" or better, or equivalent as determined by instructor
- Advisory
- Completion of ADVM 3D with grade of "C" or better
- Formerly
- DES 40
- Transfers to
- CSU
Designed for the advanced Drafting and Engineering Support student. Topics include proper CAD management skills and the development of "as built" models used in the manufacturing, architectural and civil disciplines. Focus on utilizing, creating and instituting CAD standards, policies and procedures. Development of prototypes integral to the design process in their chosen area of concentration (mechanical, civil and/or architecture). (CSU)
BI 0020 Foundations and Framing
- Units
- 3
- Hours
- 108 (36 lecture, 72 laboratory)
- Formerly
- CET 20
- Transfers to
- CSU
Fundamentals of construction foundation and framing techniques involving layout and construction to include, establishing elevations, site preparation, types of foundation forms, rebar and bolt installation, concrete placement techniques for slab on grade, cast in place (CIP), and pre-cast installations, structural steel, various types of floor systems, and applicable code requirements specific to the above. Introduction to California Green Technology and "Net Zero Energy" policies and sustainability practices for residential, commercial, and industrial construction. (CSU)
BI 0022 Introduction to Energy Efficiency Construction
- Units
- 3
- Hours
- 108 (36 lecture, 72 laboratory)
- Formerly
- CET 22
- Transfers to
- CSU
Fundamentals of residential, commercial, and industrial framing techniques to include interior and exterior walls, ceilings, roof systems, stair design, installation and placement of sub trades including dry mechanical, plumbing, electrical, and structural steel post and beam installations. Introduction the future of construction as it evolves utilizing California Green Technology, “Net Zero Energy” policies, and sustainability practices. (CSU)
BI 0024 Fundamentals of Construction Documents and Estimating
- Units
- 3
- Hours
- 54 lecture
- Formerly
- CET 24
- Transfers to
- CSU
Establishes a vocabulary and understanding of construction related documents including the symbols and detail views of building plans. Cost estimating to include material and labor cost calculations, specifications, problem solving, and bid preparations. (CSU)
BI 0026 Residential House Wiring and Codes
- Units
- 3
- Hours
- 108 (36 lecture, 72 laboratory)
- Formerly
- CET 26
- Transfers to
- CSU
Introduction in the electrical trade. Inside wiring as applied to residential, commercial, and industrial structures. Electrical service requirements for photovoltaic systems. Use of tools and materials of the trade. Review of the National Electrical Code and the applications and California Electrical Code updates to the California Green Technology and "Net Zero Energy" policies. (CSU)
BI 0028 Independent Study
- Units
- 1-3
- Formerly
- CET 28
- Transfers to
- CSU
Designed for students interested in furthering their knowledge at an independent study level in an area where no specific curriculum offering is currently available. Independent study might include, but is not limited to, research papers, special subject area projects, and research projects. See Independent Study page in catalog. (CSU)
BI 0030 Finish Carpentry
- Units
- 3
- Hours
- 108 (36 lecture, 72 laboratory)
- Advisory
- Completion with grade of "C" or better or concurrent enrollment in BI 3
- Formerly
- CET 30
Fundamentals of woodworking hand tools, power hand tools and woodworking machinery to safely develop knowledge and skills leading to finish trim carpentry. Emphasis on residential construction finish carpentry standards, details, nomenclature, trims, and methods of setting interior and exterior doors, window jamb and trims, closet packs, cabinet installs, wainscoting, stair trim and railings, base and ceiling trims and finished flooring applications. (not transferable)
BI 0032 Residential Building Codes
- Units
- 3
- Hours
- 54 lecture
- Formerly
- CET 32
Instruction in building codes for light frame one- or two-story dwellings related to local jurisdictions and the State of California. Application of codes to existing buildings with a study of regulations and abatement procedures for standard frame and Insulated Concrete Forms (ICF) green technology buildings. Includes codes related to California Green Technology and "Net Zero Energy" policies. (not transferable)
BI 0034 Plumbing and Mechanical Installation and Design
- Units
- 3
- Hours
- 108 (36 lecture, 72 laboratory)
- Formerly
- CET 34
- Transfers to
- CSU
Introduction to the planning, installing, and maintaining of mechanical (HVAC/R) and plumbing systems in accordance with local codes and ordinances. Includes use of materials and codes related to California Green Technology and "Net Zero Energy" policies. (CSU)
BI 0095 Internship in Building Industries
- Units
- 0.5-4
- Formerly
- CET 95
- Transfers to
- CSU
Designed for advanced students to work in an area related to their educational or occupational goal. Provides new on-the-job technical training under the direction of a worksite supervisor, allowing students to expand knowledge and skills in the chosen field. Mandatory orientation session and faculty approval to determine eligibility. One unit of credit is equal to 54 hours of work. Students may earn up to a total of 16 units in internship courses (any course numbered 95 and PDEV 94). (CSU)
BI 0800 Introduction to Energy Surveying
- Units
- 0
- Hours
- 40 (24 lecture, 16 laboratory)
- Prerequisite
- Completion of BI 1 with grade of "C" or better, or equivalent as determined by the program chair
- Formerly
- CET 800
Competency-based course of instruction designed to align with the American Society of Heating Refrigeration and Air Conditioning Engineers (ASHRAE) Level-1 energy auditing standards. Provides hands-on experience in residential and commercial energy auditing. Emphasis on principles and sources of energy, detailed facilities evaluation techniques, data collection for energy auditing, establishing baselines, and conducting accurate inventories. Includes workplace safety policies and practices to comply with OSHA guidelines. Students required to secure personal protective equipment as of first class session. (pass/no pass grading) (noncredit)
BI 0801 Basic Electricity and Wiring Fundamentals
- Units
- 0
- Hours
- 40 (20 lecture, 20 laboratory)
- Prerequisite
- Completion of BI 800 with grade of "Pass"
- Formerly
- CET 801
This comprehensive introduction to electrical wiring provides a well-rounded understanding of the fundamentals of basic electricity, electrical safety, electrical circuitry, and the processes and procedures of the electrical wiring trades. Includes relevant electrical codes. Students required to secure personal protective equipment as of first class session. (pass/no pass grading) (noncredit)
BI 0802 Introduction to Lighting Retrofits
- Units
- 0
- Hours
- 40 (20 lecture, 20 laboratory)
- Prerequisite
- Completion of BI 801 with grade of "Pass"
- Formerly
- CET 802
Provides well-rounded competency-based understanding of lighting retrofit trade fundamentals through hands-on experience in commercial retrofit procedures and skills. Includes electrical safety, policies, and practices as relate to retrofit work. Students required to secure personal protective equipment as of first class session. (pass/no pass grading) (noncredit)
BI 0804 Rapid Prototyping for Product Design
- Units
- 0
- Hours
- 18 (9 lecture, 9 laboratory)
- Formerly
- CET 804
Hands-on exposure to processes used to fabricate prototypes. An introduction to tools and technologies for prototyping, including design for manufacture. Example products show the process from idea to market including the series of prototypes that helped get the product to successful sales. Course materials cover safe hand tool use, power woodworking hand tools, wood shop tools, laser cutting, and CNC routers. (pass/no pass grading) (noncredit)
BI 0805 Introduction to Industry and Occupational Safety for the Building Trade
- Units
- 0
- Hours
- 28 (24 lecture, 4 laboratory)
- Formerly
- CET 805
Provides an introduction to the building trades as an occupation. Covers a variety of construction safety and health hazards workers may encounter. Provides safety information to construction workers about employee and employer rights and responsibilities. Emphasizes identification, avoidance, abatement, control, and prevention of job-related hazards on construction sites. Upon successful completion, 10 hour OSHA card issued by instructor. (pass/no pass grading) (noncredit)
BI 0806 Introduction to Building Trades and Tools
- Units
- 0
- Hours
- 48 (27 lecture, 21 laboratory)
- Prerequisite
- Completion of BI 805 with grade of "Pass"
- Formerly
- CET 806
Provides an overview of the local/regional building trade industry. Introduces students to the proper and safe operation of hand and power tools used in construction. Covers the fundamentals of construction math, measurements and blueprints. Emphasizes the employability skills such as time management, communication and proper attire for success in the construction industry. (pass/no pass grading) (noncredit)
BI 0807 Basic Material Handling and Building
- Units
- 0
- Hours
- 53 (36 lecture, 17 laboratory)
- Prerequisite
- Completion of BI 806 with grade of "Pass"
- Formerly
- CET 807
Provides an overview of building materials and techniques for construction. Introduces students to basic trades including plumbing, electrical, and HVAC. Covers the fundamentals of framing, flooring, and tiling. Explains relevant building codes. (pass/no pass grading) (noncredit)